We are Authorised Dealer, Distributor, Supplier, Exporter of Industrial Carbide Toolings, Solid Carbide Cutting Tools (SC Tools) from Pune, Maharashtra, India.
PCD inserts grades
- KORLOY PCD DINE Products are manufactured by using high quality PCD tips under ultra high temperatures and pressure. The PCD tip is welded on the qualified KORLOY carbide insert KORLOY high quality PCD products meet a wide range of application needs in turning, milling, and endmills.
- Excellent tool life for aluminum alloy and copper alloy.
- Excellent tool life for Ceramic, high-silicon aluminum and rock or stone.
- Excellent tool life for rubber, carbon, graphite and wood.
| Grade | Features | Application | Grain size | Hardness | TRS (kgf/mm2) |
|---|---|---|---|---|---|
| DP90 | Coarse diamond grain has been used to get excellent wear resistance enough to machine cemented-carbide, high Si aluminum alloy |
|
25 ~ 30 | 50 ~ 65 | 1.1 |
| DP150 | By use of fine diamond grain having good bonding property, it is suitable for machining of Non-ferrous metal, graphite |
|
5 ~ 10 | 50 ~ 60 | 1.95 |
| DP200 | By use of ultra fine diamond grain, it is possible to make sharp cutting edge. Thus it is appropriate grade to machine Non-ferrous material. |
|
~ 2 | 45 ~ 55 | 2.45 |
CBN inserts grades
- Excellent hardness and thermal resistance by sintering KORLOY's main constituents and special ceramic binder at high pressure and high temperature.
- Excellent hardness and wear resistance for higher productivity in machining cast iron and heat-treated alloy at high speed.
| Workpiece | Coating | Grades | Application | Cutting speed, vc (m/min) | Feed, fn (mm/rev) |
|---|---|---|---|---|---|
| High hardness steel | Coated | DNC100 | Continuous cutting at high speed | 180 ~ 300 | 0.03 ~ 0.3 |
| Coated | DNC250 | Continuous and low interrupted cutting at high speed | 120 ~ 220 | 0.05 ~ 0.3 | |
| Coated | DNC300 | Medium and low interrupted cutting | 90~250 | 0.05 ~ 0.2 | |
| Coated | DNC350 | Medium and high interrupted cutting | 90~150 | 0.05 ~ 0.3 | |
| Coated | DNC400 | Continuous and medium interrupted cutting | 90~220 | 0.05 ~ 0.3 | |
| Non- Coated | DB1000 | Continuous cutting at high speed | 130~250 | 0.03 ~ 0.15 | |
| Non- Coated | DB2000 | Medium and low interrupted cutting | 80~200 | 0.03 ~ 0.2 | |
| Non- Coated | DBNX20 | Highly efficient cutting | 120~150 | 0.03 ~ 0.3 | |
| Non- Coated | DBN250 | Medium and low interrupted cutting | 80~120 | 0.03 ~ 0.2 | |
| Non- Coated | DBN350 | High interrupted cutting | 120~220 | 0.03 ~ 0.2 | |
| HRSA | Non- Coated | DB7000 | Continuous cutting at high speed | 100~300 | 0.05 ~ 0.2 |
| Cast iron | Non- Coated | DB700A | Continuous cutting at high speed | 500~2000 | 0.10 ~ 0.4 |
CBN Inserts
Multi edge coated type
- Easy handling of corners.
- Strong Brazing
- Excellent tool life compared to non-coated inserts.
One Use Type
- economic price.
- easy handling of tools.
- A wide variety of series
- Smaller than expensive cBN and dramatic cost down.
- strong weld face and stable cutting performance.
Multi Edge Type
- price per edge is more reasonable compare to normal single comered, one-used type.
- insert with several brazed cBN.
- Wide application of continuous to interrupted machining.
Regrinding Type
- Long tool life.
- Excellent wear resistance, High hardness.
- Saved tool cost due to the regrinding insert 3-4 time.
Authorised Dealer, Distributor, Supplier, Exporter of Industrial Carbide Toolings, SC (Solid Carbide) Cutting Tools